new product TSMP58000 www.vishay.com vishay semiconductors rev. 1.0, 14-mar-12 1 document number: 82485 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ir sensor module for remote control systems mechanical data pinning: 1 = carrier out, 2 = gnd, 3 = v s features ? photo detector and preamplifier in one package ? ac coupled response from 20 khz to 60 khz, all data formats ? improved shielding against electrical field disturbance ? ttl and cmos compatibility ? output active low ? supply voltage 2.5 v to 5.5 v, typically the device works in the range between 2.0 v and 5.5 v ? carrier out signal for code learning functions ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 description the TSMP58000 is a miniaturized sensor for receiving the modulated signal of infrared remote control systems. a pin diode and preamplifier are asse mbled on a lead frame, the epoxy package is designed as an ir filter. the modulated output signal, carrier out, can be used for code learning applications. this component has not be en qualified according to automotive specifications. block diagram application circuit 19026 parts table carrier frequency code learning applications 20 khz to 60 khz TSMP58000 tia amp signal shaping 1 carrier out 19746 2 gnd 3 v s c 1 = 4.7 f tsopxxx x out gnd circuit c r 1 = 100 + v s gnd transmitte r with tsalxxxx v s r 1 + c 1 recommended to suppress power supply disturbances. r 2 recommended to get faster slopes and a correct high level of the output pulses. v o 19750-1 r 2 = 4.7 k
new product TSMP58000 www.vishay.com vishay semiconductors rev. 1.0, 14-mar-12 2 document number: 82485 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? stresses beyond those listed under absolute maximum ratings ma y cause permanent damage to the device. this is a stress ratin g only and functional operation of the device at these or any other cond itions beyond those indicated in the operational sections of t his specification is not implied. exposure to absolute maximum rating co nditions for extended periods may affect the device reliability. typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - testsignal absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit supply voltage (pin 3) v s - 0.3 to + 6 v output voltage (pin 1) v o - 0.3 to (v s + 0.3) v output current (pin 1) i o 5ma junction temperature t j 100 c storage temperature range t stg - 25 to + 85 c operating temperature range t amb - 25 to + 85 c soldering temperature t 10 s, 1 mm from case t sd 260 c electrical and optical characteristics carrier out (t amb = 25 c, unless otherwise specified, v s = 3 v) parameter test condition symbol min. typ. max. unit supply current (pin 3) e v = 0 i sd 0.55 0.7 0.9 ma supply voltage v s 2.5 5.5 v transmission distance e v = 0, test signal see fig. 1, ir diode tsal6200, i f = 400 ma d5m output voltage low (pin 1) i osl = 0.5 ma, test signal see fig. 1 v osl 250 mv minimum irradiance v s = 3 v, (20 khz to 60 khz) e e min. 12 25 mw/m 2 maximum irradiance test signal se e fig. 1, (20 khz to 60 khz) e e max. 50 80 w/m 2 directivity angle of half transmission distance ? 1/2 45 deg output accuracy f c = 20 khz to 60 khz, e e = 25 mw/m 2 to 50 w/m 2 , testsignal see fig. 1, ber 2% n carrier pulses input burst length - 1 cycle input burst length input burst length + 1 cycle counts carrier cycle (26.3 s in ca s e of 38 khz) delay time t d optical bur s t (input s ignal) output voltage
new product TSMP58000 www.vishay.com vishay semiconductors rev. 1.0, 14-mar-12 3 document number: 82485 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 2 - relative spectral sensitivity vs. wavelength fig. 3 - horizontal directivity fig. 4 - vertical directivity 750 850 950 1050 0 0.2 0.4 0.6 0.8 1.2 s ( ) rel - relative spectral sensitivity - wavelength (nm) 1150 94 8408 1.0 19258 0.4 0.2 0 0.6 0.9 0 30 10 20 40 50 60 70 80 1.0 0.8 0.7 d rel - relative transmission distance 19259 0.4 0.2 0 0.6 0.9 0 30 10 20 40 50 60 70 80 1.0 0.8 0.7 d rel - relative transmission distance
new product TSMP58000 www.vishay.com vishay semiconductors rev. 1.0, 14-mar-12 4 document number: 82485 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters 1.2 0.2 30.5 0.5 5 6.95 0.3 (5.55) 8.25 0.3 0.85 max. (1.54) 0.9 1.1 (4) 4.8 2.8 drawing-no.: 6.550-5263.01-4 i ss ue: 12; 16.04.10 2.54 nom. 2.54 nom. 0.5 max. 0.7 max. s pecification s according to din technical drawing s not indicated to lerance s 0.2 marking area r 2 r 2 19009
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
